Wago
Part No. 753-482
753-482 - 2-channel analog input; 4 … 20 mA HART
$847.90
1
Description
The 753-648 LON FTT Module complies with the ISO/IEC 14908 standard. The 1⁄2 inch (12 mm) wide module connects LON to 750 Series Controllers and I/O Modules (e.g., BACnet, KNX, EnOcean, DALI, MODBUS). It is a full-fledged and flexible LON device within LonWorks FT or LP networks. The modules network variable interface defines 249 network variables of any type and supports both LonMark objects and configuration properties. LON network interface is defined via LON Configurator. This comprehensive and easy-to-use software tool is a part of the WAGO-I/O-PRO Software. Interface representations are programmed via IEC-61131-3 and can be easily used for further applications. Fieldbus nodes are programmed via WAGO-I/O-PRO Software. WAGO provides a comprehensive IEC-61131-3 library of function blocks, simplifying the creation of complex control applications. A maximum of two modules may be connected to one controller. However, the number of modules depends on the memory required by the IEC application and the type of controller. The module is supplied via 24 V power jumper contacts.
Technical data
Device-specific | Number of network variables: max. 254 (249 for application) |
Transceiver | FTX2 |
Topology | per LON specification |
Number of aliases (max.) | 127 |
Baud rate | 0.078 Mbit/s |
Bus segment length (max.) | 500 m (free topology); 2700 m (bus topology) |
Transmission medium | Twisted pair – FTT |
Transmission channel | 1 |
Data width | 24-byte data |
Commissioning | via WAGO-I/O-CHECK or WAGO-I/O-PRO V2.3 |
Supply voltage (system) | 5 VDC; via data contacts |
Current consumption (5 V system supply) | 30 |
Supply voltage (field) | 24 VDC; via power jumper contacts (power supply via blade contact; transmission via spring contact) |
Isolation | 500 V system/field |
Number of incoming power jumper contacts | 2 |
Number of outgoing power jumper contacts | 2 |
Connection data
Connection technology: inputs / outputs | 8 x CAGE CLAMP® |
Connection type 1 | Inputs/Outputs |
Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
Strip length | 9 … 10 mm / 0.35 … 0.39 inches |
Physical data
Width | 12 mm / 0.472 inches |
Height | 100 mm / 3.937 inches |
Depth | 69 mm / 2.717 inches |
Depth from upper-edge of DIN-rail | 61.8 mm / 2.433 inches |
Mechanical data
Mounting type | DIN-35 rail |
Pluggable connector | Pluggable |
Material data
Color | - |
Housing material | Polycarbonate; polyamide 6.6 |
Fire load | 1.033 |
Weight | 54.8 |
Conformity marking | CE |
Environmental requirements
Ambient temperature (operation) | 0 … +55 °C |
Surrounding air temperature (storage) | -25 … +85 °C |
Protection type | IP20 |
Pollution degree (5) | 2 per IEC 61131-2 |
Operating altitude | 0 … 2000 m / 0 … 6562 ft |
Mounting position | horizontal (standing/lying); vertical |
Relative humidity (without condensation) | 95 |
Vibration resistance | per IEC 60068-2-6 |
Shock resistance | 15g per IEC 60068-2-27 |
EMC immunity to interference | per EN 61000-6-2 |
EMC emission of interference | per EN 61000-6-3 |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible pollutant concentration H2S at a relative humidity < 75% | 10 |
Permissible pollutant concentration SO 2 at a relative humidity < 75% | 25 |
Specifications
Connection data
Connectable Conductor MaterialsCopper
Connection Technology: Inputs / Outputs8 x CAGE CLAMP®
Connection Type 1Inputs/Outputs
Fine-Stranded Conductor0.08 … 2.5 mm² / 28 … 14 AWG
Solid Conductor0.08 … 2.5 mm² / 28 … 14 AWG
Strip Length9 … 10 mm / 0.35 … 0.39 inches
Environmental requirements
Ambient Temperature (Operation)0 … +55 °C °C
EMC Emission Of Interferenceper EN 61000-6-3
EMC Immunity To Interferenceper EN 61000-6-2
Exposure To PollutantsPer IEC 60068-2-42 and IEC 60068-2-43
Mounting Positionhorizontal (standing/lying); vertical
Operating Altitude0 … 2000 m / 0 … 6562 ft
Permissible Pollutant Concentration H2S At A Relative Humidity < 75%10
Permissible Pollutant Concentration SO 2 At A Relative Humidity < 75%25
Pollution Degree (5)2 per IEC 61131-2
Protection TypeIP20
Relative Humidity (Without Condensation)95
Shock Resistance15g per IEC 60068-2-27
Surrounding Air Temperature (Storage)-25 … +85 °C
Vibration Resistanceper IEC 60068-2-6
Material data
Color-
Conformity MarkingCE
Fire Load1.033
Housing MaterialPolycarbonate; polyamide 6.6
Weight54.8
Mechanical data
Mounting TypeDIN-35 rail
Pluggable ConnectorPluggable
Physical data
Depth69 mm / 2.717 inches mm
Depth From Upper-Edge Of DIN-Rail61.8 mm / 2.433 inches
Height100 mm / 3.937 inches mm
Width12 mm / 0.472 inches mm
Technical data
Baud Rate0.078 Mbit/s
Bus Segment Length (Max.)500 m (free topology); 2700 m (bus topology)
Commissioningvia WAGO-I/O-CHECK or WAGO-I/O-PRO V2.3
Current Consumption (5 V System Supply)30
Data Width24-byte data
Device-SpecificNumber of network variables: max. 254 (249 for application)
Isolation500 V system/field
Number Of Aliases (Max.)127
Number Of Incoming Power Jumper Contacts2
Number Of Outgoing Power Jumper Contacts2
Supply Voltage (Field)24 VDC; via power jumper contacts (power supply via blade contact; transmission via spring contact)
Supply Voltage (System)5 VDC; via data contacts
Topologyper LON specification
TransceiverFTX2
Transmission Channel1
Transmission MediumTwisted pair – FTT
