Skip to main content
IIDM Logo

Description


Single Phase
DC Systems Drives

This family of single phase DC drives with isolated control circuitry, is designed to meet the most exacting requirements of high performance systems builders.

It is a range of full featured products using advanced manufacturing technologies to give unequaled value and functionality to OEMs and System Integrators with world wide markets and demanding applications.
Features
  • Single Phase

    DC Systems Drives

  • Standard Features:
    • Approvals: CE
    • Linear torque control
    • Armature voltage or tach feedback
    • Calibration range switches
    • Speed reference 0-10V or 4-20mA
    • Maximum and minimum speed settings
    • Adjustable current limit
    • Current range switch selectable (not on 400i)
    • Independently adjustable up and down ramps
    • 150% overload capacity, 30 second stall timer
    • Stall relay contact output (transistor on 400i)
    • Zero speed relay contact (transistor on 400i)
    • Control fuses fitted (Power fuse on 400i)
    • Start inhibit after power loss
    • Power on and stall indicator LEDs
    • Speed signal output
    • Current signal output
    • Ramp signal output
    • Total demand signal output
    • Dual supply voltage 110 / 230 VAC, 50/60Hz
    • Suitable for shunt or PM motors
    • IR compensation
    • Stability adjustment

    Additional Regen Drive Features:
    • Speed reference +/-10V or 4-20mA
    • Speed trim input
    • Independent up & down ramps in FWD & REV
    • Separate adjustable current limits motor/brake
    • Torque control in either 2 or 4 quadrants
    • Relay for Stall, Zero speed, Reverse, Overload
    • Control fuses fitted
    • Fast, ramped or coast stop
    • LEDs for + current, - current, stall & stall timer
    • Momentary contact for reversing applications

    Enclosed Drives:
    Enclosed wall mounting versions of these drives and a wide range of other options are available. Please call (410) 604-3400 for more information.

Specifications

General

FeaturesSingle Phase DC Systems Drives | Standard Features: Approvals: CE Linear torque control Armature voltage or tach feedback Calibration range switches Speed reference 0-10V or 4-20mA Maximum and minimum speed settings Adjustable current limit Current range switch selectable (not on 400i) Independently adjustable up and down ramps 150% overload capacity, 30 second stall timer Stall relay contact output (transistor on 400i) Zero speed relay contact (transistor on 400i) Control fuses fitted (Power fuse on 400i) Start inhibit after power loss Power on and stall indicator LEDs Speed signal output Current signal output Ramp signal output Total demand signal output Dual supply voltage 110 / 230 VAC, 50/60Hz Suitable for shunt or PM motors IR compensation Stability adjustment Additional Regen Drive Features: Speed reference +/-10V or 4-20mA Speed trim input Independent up & down ramps in FWD & REV Separate adjustable current limits motor/brake Torque control in either 2 or 4 quadrants Relay for Stall, Zero speed, Reverse, Overload Control fuses fitted Fast, ramped or coast stop LEDs for + current, - current, stall & stall timer Momentary contact for reversing applications Enclosed Drives: Enclosed wall mounting versions of these drives and a wide range of other options are available. Please call (410) 604-3400 for more information.

More from Bardac Devices