Skip to main content
IIDM Logo
753-655

Description

The 75x-655 AS-I Master connects AS-Interface systems to a higher-level fieldbus. This module acts as a master for the AS-Interface and as a slave for the fieldbus. The 75x-655 AS-I Master is a M4 master in accordance with the AS-Interface V3.0 Specification. This means: Up to 62 AS-Interface slaves can be connected per AS-I line Analog signal transfer is integrated in the master. All slave profiles are supported in compliance with V3.0. Combined 1–5 transaction types and acyclic write/read services are implemented. The AS-I functions are provided both cyclically and acyclically via the fieldbus. In cyclic data transfer, up to 32 bytes of I/O data are transferred for the AS-I line binary data. Free cyclic process image areas can be mapped with analog values. Furthermore, analog signals and all other commands and data of the new AS-I specification can be transferred in a management channel via the fieldbus. Diagnostics, which go far beyond the AS-I specifications, simplify the detection of both sporadic configuration errors and AS-I communication interferences. An auto-installation mode allows an AS-Interface network to be created via sequential slave installation, with no addressing tool required. Both signal transmission and operating status, as well as trouble-free local bus communication, are indicated via LEDs.

Notes

Note

Pluggable connectors and coding fingers (753 Series) are not included.

Technical data

Device specification

AS-i master class: M4; AS-I Specification: 3.0

Device-specific

AS-I cable length (max.): 100 m, with repeater 300 m

Topology

Number of slaves: up to 62; Slave profiles: V3.0 with transaction types 1 … 5

Current consumption (typ.)

40 mA (AS-I)

Cycle time (AS-I)

0.3 … 10 ms, depending on the number of slaves

Transmission channel

1

Data width

12 … 48 bytes (max.), configurable, including 1 byte control/status

Power supply

AS-I: 26.5 … 31.6 V

Supply voltage (system)

5 VDC; via data contacts

Current consumption (5 V system supply)

55

Supply voltage (field)

24 VDC (-15 … +20 %); via power jumper contacts (power supply via blade contact; transmission via spring contact)

Isolation

500 V system/supply/AS-I

Number of incoming power jumper contacts

2

Number of outgoing power jumper contacts

2

Connection data

Connection technology: inputs / outputs

8 x CAGE CLAMP®

Connection type 1

Inputs/Outputs

Solid conductor

0.08 … 2.5 mm² / 28 … 14 AWG

Fine-stranded conductor

0.08 … 2.5 mm² / 28 … 14 AWG

Strip length

9 … 10 mm / 0.35 … 0.39 inches

Physical data

Width

12 mm / 0.472 inches

Height

100 mm / 3.937 inches

Depth

69 mm / 2.717 inches

Depth from upper-edge of DIN-rail

61.8 mm / 2.433 inches

Mechanical data

Mounting type

DIN-35 rail

Pluggable connector

Pluggable

Material data

Color

light gray

Housing material

Polycarbonate; polyamide 6.6

Fire load

0.823

Weight

46

Conformity marking

CE

Environmental requirements

Ambient temperature (operation)

0 … +55 °C

Surrounding air temperature (storage)

-25 … +85 °C

Protection type

IP20

Pollution degree (5)

2 per IEC 61131-2

Operating altitude

0 … 2000 m / 0 … 6562 ft

Mounting position

horizontal (standing/lying); vertical

Relative humidity (without condensation)

95

Vibration resistance

4g per IEC 60068-2-6

Shock resistance

15g per IEC 60068-2-27

EMC immunity to interference

per EN 61000-6-2, marine applications

EMC emission of interference

per EN 61000-6-4, marine applications

Exposure to pollutants

Per IEC 60068-2-42 and IEC 60068-2-43

Permissible pollutant concentration H2S at a relative humidity < 75%

10

Permissible pollutant concentration SO 2 at a relative humidity < 75%

25

Specifications

Connection data

Connectable Conductor MaterialsCopper
Connection Technology: Inputs / Outputs8 x CAGE CLAMP®
Connection Type 1Inputs/Outputs
Fine-Stranded Conductor0.08 … 2.5 mm² / 28 … 14 AWG
Solid Conductor0.08 … 2.5 mm² / 28 … 14 AWG
Strip Length9 … 10 mm / 0.35 … 0.39 inches

Environmental requirements

Ambient Temperature (Operation)0 … +55 °C °C
EMC Emission Of Interferenceper EN 61000-6-4, marine applications
EMC Immunity To Interferenceper EN 61000-6-2, marine applications
Exposure To PollutantsPer IEC 60068-2-42 and IEC 60068-2-43
Mounting Positionhorizontal (standing/lying); vertical
Operating Altitude0 … 2000 m / 0 … 6562 ft
Permissible Pollutant Concentration H2S At A Relative Humidity < 75%10
Permissible Pollutant Concentration SO 2 At A Relative Humidity < 75%25
Pollution Degree (5)2 per IEC 61131-2
Protection TypeIP20
Relative Humidity (Without Condensation)95
Shock Resistance15g per IEC 60068-2-27
Surrounding Air Temperature (Storage)-25 … +85 °C
Vibration Resistance4g per IEC 60068-2-6

Material data

Colorlight gray
Conformity MarkingCE
Fire Load0.823
Housing MaterialPolycarbonate; polyamide 6.6
Weight46

Mechanical data

Mounting TypeDIN-35 rail
Pluggable ConnectorPluggable

Notes

NotePluggable connectors and coding fingers (753 Series) are not included.

Physical data

Depth69 mm / 2.717 inches mm
Depth From Upper-Edge Of DIN-Rail61.8 mm / 2.433 inches
Height100 mm / 3.937 inches mm
Width12 mm / 0.472 inches mm

Technical data

Current Consumption (5 V System Supply)55
Current Consumption (Typ.)40 mA (AS-I)
Cycle Time (AS-I)0.3 … 10 ms, depending on the number of slaves
Data Width12 … 48 bytes (max.), configurable, including 1 byte control/status
Device-SpecificAS-I cable length (max.): 100 m, with repeater 300 m
Device SpecificationAS-i master class: M4; AS-I Specification: 3.0
Isolation500 V system/supply/AS-I
Number Of Incoming Power Jumper Contacts2
Number Of Outgoing Power Jumper Contacts2
Power SupplyAS-I: 26.5 … 31.6 V
Supply Voltage (Field)24 VDC (-15 … +20 %); via power jumper contacts (power supply via blade contact; transmission via spring contact)
Supply Voltage (System)5 VDC; via data contacts
TopologyNumber of slaves: up to 62; Slave profiles: V3.0 with transaction types 1 … 5
Transmission Channel1

Similar products

More from Wago