Skip to main content
IIDM Logo
750-654

Description

The data exchange module allows the exchange of data between different fieldbus systems. Two modules form a communication pair that is installed in fieldbus nodes and connected by two twisted wire pairs. Data exchange is performed in full duplex operation, independent of the fieldbus system used. The data in the fieldbus couplers output process image is transmitted to the communication partner. This module then transmits the data to the input process image of its fieldbus coupler and vice versa. Factory preset transmission is 32 bits of input data and 32 bits of output data. Data transfer time for 32 bit-I/O is about 5 ms. The “function“ LED indicates a data exchange with the coupler. The status of the data transmission is indicated by the TxD and RxD LEDs.

Technical data

Baud rate

62.5 kBd

Bit transfer

via 2 twisted pairs with differential signals

Transmission channels

1 TxD / 1 RxD, full-duplex

Line length

approx. 1000 m twisted pair

Data width

1 x 32-bit input/output; 1 x 8-bit control/status

Line impedance

120

Supply voltage (system)

5 VDC; via data contacts

Current consumption (5 V system supply)

65

Isolation

500 V system/field

Connection data

Connection technology: inputs / outputs

8 x CAGE CLAMP®

Connection type 1

Inputs/Outputs

Solid conductor

0.08 … 2.5 mm² / 28 … 14 AWG

Fine-stranded conductor

0.08 … 2.5 mm² / 28 … 14 AWG

Strip length

8 … 9 mm / 0.31 … 0.35 inches

Physical data

Width

12 mm / 0.472 inches

Height

100 mm / 3.937 inches

Depth

69.8 mm / 2.748 inches

Depth from upper-edge of DIN-rail

62.6 mm / 2.465 inches

Mechanical data

Mounting type

DIN-35 rail

Material data

Color

light gray

Housing material

Polycarbonate; polyamide 6.6

Fire load

0.085

Weight

49

Conformity marking

CE

Environmental requirements

Ambient temperature (operation)

0 … +55 °C

Surrounding air temperature (storage)

-25 … +85 °C

Protection type

IP20

Pollution degree (5)

2 per IEC 61131-2

Operating altitude

0 … 2000 m / 0 … 6562 ft

Mounting position

horizontal (standing/lying); vertical

Relative humidity (without condensation)

95

Vibration resistance

4g per IEC 60068-2-6

Shock resistance

15g per IEC 60068-2-27

EMC immunity to interference

per EN 61000-6-2, marine applications

EMC emission of interference

per EN 61000-6-4, marine applications

Exposure to pollutants

Per IEC 60068-2-42 and IEC 60068-2-43

Permissible pollutant concentration H2S at a relative humidity < 75%

10

Permissible pollutant concentration SO 2 at a relative humidity < 75%

25

Specifications

Connection data

Connection Technology: Inputs / Outputs8 x CAGE CLAMP®
Connection Type 1Inputs/Outputs
Fine-Stranded Conductor0.08 … 2.5 mm² / 28 … 14 AWG
Solid Conductor0.08 … 2.5 mm² / 28 … 14 AWG
Strip Length8 … 9 mm / 0.31 … 0.35 inches

Environmental requirements

Ambient Temperature (Operation)0 … +55 °C °C
EMC Emission Of Interferenceper EN 61000-6-4, marine applications
EMC Immunity To Interferenceper EN 61000-6-2, marine applications
Exposure To PollutantsPer IEC 60068-2-42 and IEC 60068-2-43
Mounting Positionhorizontal (standing/lying); vertical
Operating Altitude0 … 2000 m / 0 … 6562 ft
Permissible Pollutant Concentration H2S At A Relative Humidity < 75%10
Permissible Pollutant Concentration SO 2 At A Relative Humidity < 75%25
Pollution Degree (5)2 per IEC 61131-2
Protection TypeIP20
Relative Humidity (Without Condensation)95
Shock Resistance15g per IEC 60068-2-27
Surrounding Air Temperature (Storage)-25 … +85 °C
Vibration Resistance4g per IEC 60068-2-6

Material data

Colorlight gray
Conformity MarkingCE
Fire Load0.085
Housing MaterialPolycarbonate; polyamide 6.6
Weight49

Mechanical data

Mounting TypeDIN-35 rail

Physical data

Depth69.8 mm / 2.748 inches mm
Depth From Upper-Edge Of DIN-Rail62.6 mm / 2.465 inches
Height100 mm / 3.937 inches mm
Width12 mm / 0.472 inches mm

Technical data

Baud Rate62.5 kBd
Bit Transfervia 2 twisted pairs with differential signals
Current Consumption (5 V System Supply)65
Data Width1 x 32-bit input/output; 1 x 8-bit control/status
Isolation500 V system/field
Line Impedance120
Line Lengthapprox. 1000 m twisted pair
Supply Voltage (System)5 VDC; via data contacts
Transmission Channels1 TxD / 1 RxD, full-duplex

Similar products

More from Wago