Skip to main content
IIDM Logo
750-622

Description

This binary spacer module reserves bit addresses in the process image of a fieldbus node. Both operating mode and bit width can be adjusted via DIP switches on the side of the module. The operating mode (inputs/outputs) can be selected via one DIP switch, the number of inputs or outputs (2, 4, 6 or 8) can be selected via two DIP switches. The configuration is indicated via three LEDs. The binary spacer module also acts as a supply module. It provides the 24 V field-side voltage for the downstream I/O modules via power jumper contacts.

Technical data

Operating mode

Inputs DIP 3: OFF; Outputs DIP 3: ON

Data width

2, 4, 6 or 8 bits (adjustable via DIP switches)

Supply voltage (system)

5 VDC; via data contacts

Current consumption (5 V system supply)

10

Supply voltage (field)

24 VDC (-15 … +20 %); via power jumper contacts (power supply via CAGE CLAMP® connection; transmission via spring contact)

Isolation

500 V system/field

Number of outgoing power jumper contacts

3

Current carrying capacity (power jumper contacts)

10

Connection data

Connection technology: field supply

6 x CAGE CLAMP®

Connection type 1

Field supply

Solid conductor

0.08 … 2.5 mm² / 28 … 14 AWG

Fine-stranded conductor

0.08 … 2.5 mm² / 28 … 14 AWG

Strip length

8 … 9 mm / 0.31 … 0.35 inch

Physical data

Width

12 mm / 0.472 inch

Height

100 mm / 3.937 inch

Depth

69.8 mm / 2.748 inch

Depth from upper-edge of DIN-rail

62.6 mm / 2.465 inch

Mechanical data

Mounting type

DIN-35 rail

Material data

Color

light gray

Housing material

Polycarbonate; polyamide 6.6

Fire load

1.333

Weight

44.9

Conformity marking

CE

Environmental requirements

Ambient temperature (operation)

0 … +55 °C

Surrounding air temperature (storage)

-25 … +85 °C

Protection type

IP20

Pollution degree (5)

2 per IEC 61131-2

Operating altitude

0 … 2000 m / 0 … 6562 ft

Mounting position

horizontal (standing/lying); vertical

Relative humidity (without condensation)

95

Vibration resistance

per IEC 60068-2-6

Shock resistance

15g per IEC 60068-2-27

EMC immunity to interference

per EN 61000-6-2

EMC emission of interference

per EN 61000-6-4

Exposure to pollutants

Per IEC 60068-2-42 and IEC 60068-2-43

Permissible pollutant concentration H2S at a relative humidity < 75%

10

Permissible pollutant concentration SO 2 at a relative humidity < 75%

25

Specifications

Connection data

Connectable Conductor MaterialsCopper
Connection Technology: Field Supply6 x CAGE CLAMP®
Connection Type 1Field supply
Fine-Stranded Conductor0.08 … 2.5 mm² / 28 … 14 AWG
Solid Conductor0.08 … 2.5 mm² / 28 … 14 AWG
Strip Length8 … 9 mm / 0.31 … 0.35 inch

Environmental requirements

Ambient Temperature (Operation)0 … +55 °C °C
EMC Emission Of Interferenceper EN 61000-6-4
EMC Immunity To Interferenceper EN 61000-6-2
Exposure To PollutantsPer IEC 60068-2-42 and IEC 60068-2-43
Mounting Positionhorizontal (standing/lying); vertical
Operating Altitude0 … 2000 m / 0 … 6562 ft
Permissible Pollutant Concentration H2S At A Relative Humidity < 75%10
Permissible Pollutant Concentration SO 2 At A Relative Humidity < 75%25
Pollution Degree (5)2 per IEC 61131-2
Protection TypeIP20
Relative Humidity (Without Condensation)95
Shock Resistance15g per IEC 60068-2-27
Surrounding Air Temperature (Storage)-25 … +85 °C
Vibration Resistanceper IEC 60068-2-6

Material data

Colorlight gray
Conformity MarkingCE
Fire Load1.333
Housing MaterialPolycarbonate; polyamide 6.6
Weight44.9

Mechanical data

Mounting TypeDIN-35 rail

Physical data

Depth69.8 mm / 2.748 inch mm
Depth From Upper-Edge Of DIN-Rail62.6 mm / 2.465 inch
Height100 mm / 3.937 inch mm
Width12 mm / 0.472 inch mm

Technical data

Current Carrying Capacity (Power Jumper Contacts)10
Current Consumption (5 V System Supply)10
Data Width2, 4, 6 or 8 bits (adjustable via DIP switches)
Isolation500 V system/field
Number Of Outgoing Power Jumper Contacts3
Operating ModeInputs DIP 3: OFF; Outputs DIP 3: ON
Supply Voltage (Field)24 VDC (-15 … +20 %); via power jumper contacts (power supply via CAGE CLAMP® connection; transmission via spring contact)
Supply Voltage (System)5 VDC; via data contacts

Similar products

More from Wago